Organic Ligands Research Articles

Effect of Boron-Doping on Gate-Opening CO2 Adsorption in Zinc-Benzimidazolate Coordination Networks.

Flexible metal-organic frameworks (MOFs) have attracted much attention as selective gas adsorption and storage. This report describes boron doping in zeolitic imidazolate framework-7 (B-ZIF-7), which exhibits reversible phase transition during CO2 adsorption/desorption. We have successfully prepared B-ZIF-7 coordination networks using boron-bridged benzimidazolate (B(bim)4-) as organic ligands. Powder X-ray diffraction (PXRD) measurements and infrared spectroscopy revealed that B-ZIF-7 has a crystal structure similar to that of ZIF-7 while containing boron bridging in the coordination network. Since B-ZIF-7 forms a cationic coordination network, the guest anions are encapsulated within the pore. CO2 adsorption/desorption measurements at 300 K showed that B-ZIF-7(NO3), which contains nitrate ions (NO3-) as guest anions in its pores, exhibits a S-shaped CO2 adsorption/desorption isotherm, which is characteristic of gate-opening type MOFs. Compared with ZIF-7, B-ZIF-7(NO3) has superior CO2 adsorption capacity in the low-pressure and superior CO2 storage capacity. The CO2 adsorption and desorption behavior of B-ZIF-7(NO3) was analyzed by in situ temperature-controlled PXRD measurements and thermogravimetric analysis under a CO2 atmosphere, and a reversible phase transition was observed. We have also successfully prepared B-ZIF-7(Cl) and B-ZIF-7(OTf) (OTf = CF3SO3-) with different guest anions. The CO2 adsorption/desorption behaviors of B-ZIF-7(Cl) and B-ZIF-7(OTf) were significantly different from those of B-ZIF-7(NO3) and ZIF-7. B-ZIF-7(Cl) showed gate opening at a higher pressure than ZIF-7, and B-ZIF-7(OTf) did not show S-shaped CO2 adsorption isotherm and showed adsorption behavior in micropores. These results indicate that the CO2 adsorption behavior of B-ZIF-7 depends on the interaction between the guest anions and CO2 molecules or the cationic framework and the bulkiness of the guest anions. Boron doping in a coordination network with boron-bridged imidazolate ligands is a promising strategy to increase the gas adsorption capability of porous materials.

Synthesis and Crystal Structure Studies of a New Complex of Co (III)-Schiff Base Derivative Derived from Isonicotinohydrazide

A new Co(III) complex prepared by the reaction of N'–(1–(pyridin–2 yl)ethylidene) isonicotinohydrazide (H2L) with Co(II) ion is reported in this paper. The H2L ligand is structurally characterized by elemental analysis, NMR, and infrared spectroscopies. The mononuclear complex [Co(HL)2]·Cl·3H2O (1), is characterized by infrared spectroscopy, elemental analysis, conductance, magnetic room temperature measurement and single X-ray diffraction. The complex crystallizes in the monoclinic system with space group P21/c. The parameters of the unit cell are a = 9.6818(3) Å; b = 25.1587(6) Å; c = 11.5481(3) Å;   β = 101.797(3) °; Z = 4; Rint = 0.0313 and wR(F2) = 0.0812. The asymmetric unit of the compound contains a discrete [Co(HL)2]+ cation one  free chloride anion and three uncoordinated water molecules. In the discrete cation one Co3+ ion two organic ligand molecules are present. The coordination polyhedron around the Co3+ center is best described as a distorted octahedral with CoN4O2 chromophore. The crystal structure of the complex is stabilized by intramolecular and intermolecular hydrogen bonds.

Ultrastable Copper Iodide Hybrid with Intrinsic Greenish White-Light Emission by Incorporating an Anionic Inorganic Functional Unit into an Extended Structure.

Incorporating a functional unit into the multidimensional coordination polymer skeleton is an efficient way to improve the stability of materials and expand their application. In this paper, anionic copper iodide inorganic functional modules are incorporated into one-dimensional extended chains by using a unique bidentate cationic organic ligand. Benefiting from the ionic extended structure, the resulting hybrid possesses a remarkable stability with a decomposition temperature as high as 300 °C. Meanwhile, the hybrid material exhibits intrinsic greenish white-light emission with a high photoluminescent quantum yield of 70%. The emission was investigated by temperature-dependent emission spectra, which proved to be the result of the synergistic effect of two energy states. The novel synthetic strategy provides an efficient route for the development of functional organic metal halides.

Coordination Confined Silver-Organic Framework for High Performance Electrochemical Deionization.

Silver (Ag) is deemed a promising anode material for capacitive deionization (CDI) due to its high theoretical capacity and efficient selectivity to Cl-. However, the strong volume change during the conversion reaction significantly undermines the cycling performance of the Ag electrode. Additionally, achieving well-dispersed Ag in the active matrix is challenging, as Ag electrodes prepared by conventional thermal reduction tend to agglomerate. Herein, the organic linker confinement strategy is proposed, applying metal-organic framework (MOF) chemistry between Ag nodes and organic ligands to construct Ag-based MOF. The uniform dispersion of Ag at the molecular level, confined in the organic matrix, efficiently enhances the utilization of active sites, and strengthens the interfacial stability of Ag. Consequently, the Ag-MOF for the CDI anode exhibits an excellent Cl- removal capacity of 121.52mg g-1 at 20mA g-1 in 500mg L-1 NaCl solution, and a high Ag utilization rate of 60.54%. After 100 cycles, a capacity retention of 96.93% is achieved. Furthermore, the Cl- capture mechanism of Ag-MOF is elucidated through density functional theory (DFT) calculations, ex situ XRD, ex situ Raman and XPS. This ingenious electrode design can offer valuable insights for the development of high-performance conversion electrodes for CDI applications.

Chemical Flexibility of Atomically Precise Metal Clusters.

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Functionalization of β-Cyclodextrin Metal-Organic Frameworks with Gelatin and Glutamine for Drug Delivery of Curcumin to Cancerous Cells

Beta-cyclodextrin Metal-Organic Framework (β-CD-MOF) is a unique class of porous materials that merges the inherent properties of cyclodextrins with the structural advantages of metal-organic frameworks (MOFs). When combined with the concept of MOFs, which are crystalline structures composed of metal ions or clusters linked by organic ligands, the resulting β-CD-MOF holds immense potential for various applications, especially in the field of drug delivery. In this study, biocompatible metal-organic frameworks (MOFs) synthesized using β-Cyclodextrin (β-CD) and potassium enabled drug delivery of curcumin (CCM) to cancerous cells. Functionalizing β-CD-MOF with L-glutamine (glutamine-β-CD-MOF) enhanced cancer cell-specific targeting due to glutamine's essential role in cancer cell proliferation and energy pathways. Amino group functionalization provided further functionalization opportunities. Gelatin coating (gelatin@β-CD-MOF) facilitated controlled drug release in an acidic medium. High drug loading capacities (52.38-55.63%) were achieved for β-CD-MOF@CCM and glutamine-β-CD-MOF@CCM, leveraging the high porosity and affinity of amine and phenol groups of curcumin. The MTT assay highlighted the specificity and differentiation of glutamine-β-CD-MOF in targeting cancerous over normal cells. These functionalized β-CD MOFs efficiently encapsulate curcumin, ensuring controlled drug release and enhanced therapeutic efficacy, particularly in cancer therapy.

Challenges in the solution phase synthesis of PSMA-11 and PSMA-617: organic ligands for radiopharmaceutical preparations in prostate cancer medication

Abstract Patient specific treatments for different cancers are currently being actively addressed through nuclear medicine. More recently, the identification of biomarker namely; prostate-specific membrane antigen (PSMA) expressed on the prostate cancer cell surface has been considered as a turning point in prostate cancer management using radiopharmaceuticals. In this treatment method, apart from radionuclide, organic ligands that target PSMA constitute an essential component. PSMA-11 and PSMA-617 are two important ligands that form the radiopharmaceuticals, [68Ga]Ga-PSMA-11, [177Lu]Lu-PSMA-617, which are currently powering the prostate cancer management, especially metastatic castration resistant prostate cancer (mCRPC) in most part of the world. Identification of efficient synthetic routes towards these highly expensive ligands is an important prerequisite to make this treatment modality more popular. In this account, the synthetic challenges that we circumvent during the solution phase synthesis of PSMA-11 and PSMA-617, through different chemical synthetic routes are demonstrated. Post-synthesis, both the ligands, PSMA-11 and PSMA-617 were successfully radiolabelled using 68Ga, and 177Lu, respectively, to generate corresponding labelled products [68Ga]Ga-PSMA-11, and [177Lu]Lu-PSMA-617, in good radiochemical purity.

Non-monotonic thermal conductivity modulation in colloidal quantum dot superlattices via ligand engineering

Colloidal quantum dots (QDs), which consist of inorganic cores surrounded by soft organic ligands, can self-assemble into superlattices exhibiting long-range order. Their tunability, in terms of size, shape, and ligand properties, makes them promising for applications in solar cells, photodetectors, and light-emitting diodes. However, the complex interplay between ligand stiffness, QDs cores-ligands coupling strength, and its impact on QDs' morphology and thermal properties is not well understood. This work employs molecular dynamics simulations to investigate the possibility of modulating the thermal conductivity of QDs superlattices via ligand engineering. It is found that the structural stability of QDs superlattices depends significantly on the interaction strength between the QDs cores and ligands. At lower interaction strengths, the instability manifests itself in a random fusion of the QDs cores, while at intermediate strengths a stable simple cubic lattice structure is maintained. Conversely, higher interaction strengths lead to amorphization in the surface regions of QDs core. We observed a nonlinear trend in the thermal conductivity with varying QD-ligand interaction strengths due to competing factors: fusion of QDs cores at lower interaction strengths and increased crosslinking interaction among ligands at higher interaction strengths. The influence of ligand stiffness on thermal conductivity was found to be minimal. This study provides a deep insight into the role of ligand stiffness and interaction strength on structural dynamics and thermal transport in QDs superlattice and demonstrates the feasibility of engineering thermal transport in QDs superlattice via ligand engineering.

Electrostatic Self-assembly Synthesis of Pd/In2O3 Nanocatalysts with Improved Performance Toward CO2 Hydrogenation to Methanol.

CO2 hydrogenation to methanol has emerged as a promising strategy for achieving carbon neutrality and mitigating global warming, in which the supported Pd/In2O3 catalysts are attracting great attention due to their high selectivity. Nonetheless, conventional impregnation methods induce strong metal-support interaction (SMSI) between Pd and In2O3, which leads to the excessive reduction of In2O3 and the formation of undesirable PdIn alloy in hydrogen-rich atmospheres. Herein, we innovatively synthesized Pd/In2O3 nanocatalysts by the electrostatic self-assembly process between surface-modified composite precursors with opposite charges. And the organic ligands concurrently serve as Pd nanoparticle protective agents. The resultant Pd/In2O3 nanocatalyst demonstrates the homogeneous distribution of Pd nanoparticles with controllable sizes on In2O3 supports and the limited formation of PdIn alloy. As a result, it exhibits superior selectivity and stability compared to the counterparts synthesized by the conventional impregnation procedure. Typically, it attains a maximum methanol space-time yield of 0.54 gMeOH h-1gcat-1 (300 °C, 3.5 MPa, 21,000 mL gcat-1 h-1). Notably, the correlation characterization results reveal the significant effect of small-size, highly dispersed Pd nanoparticles in mitigating MSI. These results provide an alternative strategy for synthesizing highly efficient Pd/In2O3 catalysts and offer a new insight into the strong metal-support interaction.

Synthesize and Characterization of Pt-supported Co-ZIF for Catalytic Hydrocracking and Hydroisomerization of n-Hexadecane

Zeolitic Imidazole Frameworks (ZIFs) are prospective porous materials as catalyst support due to their relatively large surface area, and tunability in size, structure, and porosity. Recent studies have also shown that ZIF is the best candidate for various catalytic redox reactions such as the oxidation of benzyl aromatic hydrocarbons. In this study, the synthesized Pt catalyst supported on Co-ZIF was varied by the organic ligands: imidazole, benzimidazole, and 1-(3-aminopropyl) imidazole, then followed by impregnation of Pt precursor. The catalysts were characterized its physical and chemicals properties such as Fourier Transform Infrared (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Brunauer Emmet Teller (BET), Temperature-Programmed Desorption (NH3-TPD and CO2-TPD). The prepared catalysts were evaluated for catalytic hydrocracking and hydroisomerization of n-hexadecane in a 100 ml-batch reactor. GC-MS analysis presented that the Pt/ZIF catalyst with imidazole ligands has better performance than others. Hence, the optimization of n-Hexadecane conversion was carried out by the Pt/ZIF-imidazole catalyst varying the amount of metal loading, time and temperature reaction. The results showed that the reaction temperature of 350 ºC using 20 bar H2 for 4 h and the addition of 15 wt% Pt successfully achieved 90.77% conversion and produced the highest yield of isomers and alkanes, 4.04% and 35.75%, respectively. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Preparation of metal organic framework by strategy of ligand premodification coupling with dual ligands and adsorption behaviors for organic dyes

The method of ligand premodification coupling with dual ligands to introduce several functional groups can regulate the pore structure of the porous materials to meet different demands and to maintain the integrity of the framework. Amino groups was introduced into organic ligand by reacting with polyethyleneimine and then it was applied as one of the ligands to prepare porous materials. A series of porous materials were synthesized through varying the additional amount of modified ligand and characterized by several techniques such as BET, FTIR, XRD, XPS, SEM and EDS. The prepared materials were then used to remove organic dyes methyl orange (MO), methylene blue (MB) and Congo red (CR) from aqueous solution. The porous materials exhibited larger adsorption capacities and fast adsorption rate for MO and MB as certain modified ligand introduced. Due to steric hindrance of introduced amino chain, the adsorption capacities for CR decreased. The results of adsorption kinetics and adsorption isotherm studies showed that the adsorption process was more in line with pseudo-second kinetic model and Langmuir isotherm. The adsorption selectivity of the material for MB compared to MO could be controlled by altering the amount of modified ligand The prepared porous materials can be used as fascinating adsorbents for removal of dyes from aqueous solution in a wide pH range, and it was attractive and useful from practical viewpoint.

Insights into biomimetic system-ligand interaction of substituted isophthalic acid: A functionality induced photophysical study.

The present article attempts to interpret the modulation of photophysical properties of isophthalic acid (IPA) through its amino [5-amino isophthalic acid (5-amino IPA)] and azido [5-azido isophthalic acid (5-azido IPA)] substituted derivatives which are chemically potent organic ligands. The ground state structure-reactivity correlation of 5-amino IPA and 5-azido IPA has been deciphered through computational studies. The computed energetics show significant interaction feasibility of the substituted ligand systems with the biomimetic systems which is further validated experimentally. The binding interaction of the probes with oppositely polarized functionalization is studied to be significant with cetyltrimethylammonium bromide (CTAB) and bovine serum albumin (BSA) with the amino functionalized derivative having a comparatively stronger binding constant value. The steady-state absorption and fluorescence study establish significant modification of polarity of the heteronuclear probes. The micro polarity study in water-dioxane mixtures enables determination of polarity of 5-amino IPA in CTAB and BSA unlike 5-azido IPA. Presence of an overlapping region between the emission spectrum of BSA and the absorption spectrum of the probes as probable donor-acceptor pair are also scrutinized via the steady-state fluorescence studies. The photophysical behavior of 5-amino IPA is observed to be somewhat dissimilar to that of 5-azido IPA.

Tetra-Ln3+-Implanted Tellurotungstates Covalently Modified by dl-Malic Acid: Proton Conduction and Photochromic Properties.

Three unique dl-malic acid covalently modified tetra-Ln3+-implanted tellurotungstates [H2(CH3)2]9NaH9[Ln4(H2O)14W6O13(OH)5(Mal)2(B-α-TeW9O33)4]·48H2O [Ln = La3+ (1), Ce3+ (2), Pr3+ (3); H3Mal = dl-malic acid] were fabricated by reacting Na2TeO3, Na2WO4·2H2O, Mal, and LnCl3·6H2O with dimethylamine hydrochloride in an aqueous solution. The most prominent architectural feature of these compounds is the covalent connection mode of an organic ligand and a polyoxometallate backbone, which is relatively rare in the realm of polyoxotungstates. The tetrameric polyanion can be deemed as four [TeW9O33]8- fragments fused together via an intriguing hexanuclearity [W6O13(OH)5(Mal)2Ln4(H2O)14]13+ cluster. Impedance measurements manifest that all three complexes display splendid proton conduction properties, with an exceptional conductivity for 2 up to 2.48 × 10-2 S·cm-1 under 85 °C and 95% relative humidity. Moreover, compounds 1 and 3 exhibited fast reversible photochromic properties with allochroic half-life periods t1/2 of 1.046 and 0.544 min, respectively.

Pristine Metal‐Organic Frameworks for Sodium‐ion Batteries: Past, Present, and Future

Owing to their adjustable redox‐active sites, designable structures high porosity, and fully activated organic ligands, pristine metal‐organic frameworks (MOFs) have been widely utilized as advanced electrode materials (i.e., both anodes and cathodes) for sodium‐ion batteries (SIBs) to satisfied the insertion/extraction larger size and mass of Na+ cations, achieving significant progresses with excellent electrochemical performance in electrochemical energy storage devices. Here, the recent advances on pristine MOFs as anodes and cathodes for SIBs are summarized. A thorough investigation delves into the detailed characteristics, energy storage mechanisms, and electrochemical performance of diverse pristine MOFs for SIBs are also clarified. Furthermore, the outlooks on pristine MOF electrodes in SIBs are also provided.

Copper/cobalt metal-organic framework composites for advanced anode material of lithium-ion battery

In this paper, two new types of metal-organic frameworks (MOFs) materials, namely Cu-IM and Co-MOF, have been successfully applied to the anode of lithium-ion batteries with LiPF6 (EC: DMC = 1:1, volume) electrolyte additive. Cu-IM and Co-MOF employed imidazole (IM) and 2-methylimidazole (2-MeIM) as organic ligands, respectively. The results revealed the synthesized MOFs exhibited high initial discharge specific capacities (Cu-IM: 1964.5 mAh g−1, Co-MOF: 1423.3 mAh g−1) as well as low internal resistances (Cu-IM: 146 Ω; Co-MOF: 236 Ω). To alleviate the issue of capacity decay in single MOFs, we attempted the dual-MOFs materials through the rational design of interfacial/surface properties and microstructure. Compared to Cu-IM, the prepared Cu-IM/Co-MOF composites have a higher specific surface area and pore volume. Furthermore, the charge transfer resistance of Cu-IM/Co-MOF composites (141 Ω) was lower than that of Cu-IM and Co-MOF respectively. After a heat treatment to Cu-IM/Co-MOF composites, the electrochemical performance of obtained Cu-IM/Co-MOF 250 dual-MOFs composites have been significantly improved. The Cu-IM/Co-MOF 250 dual-MOFs composites demonstrated excellent cycling stability and high discharge specific capacities at various current densities. The composites displayed stable discharge specific capacity retention of 834 mAh g−1 (50 mA g−1, 75 cycles), 710.5 mAh g−1 (200 mA g−1, 50 cycles), and 392.5 mAh g−1 (500 mA g−1, 50 cycles), highlighting their promising performance for energy storage applications. The synthesized Cu-IM/Co-MOF 250 dual-MOFs composites demonstrates exceptional cycling performance and rate capability, implying that it has the promising prospects as anode material for lithium-ion batteries.

Bimetal-Organic Frameworks Incorporating Both Hard and Soft Base Active Sites for Heavy Metal Ion Capture.

The design and synthesis of stable porous materials capable of removing both hard and soft metal ions pose a significant challenge. In this study, a novel metal-organic framework (MOF) adsorbent named CdK-m-COTTTB was developed. This MOF material was constructed using sulfur-rich m-cyclooctatetrathiophene-tetrabenzoate (m-H4COTTTB) as the organic ligand and oxygen-rich bimetallic clusters as the inorganic nodes. The incorporation of both soft and hard base units within the MOF structure enables effective removal of various heavy metal ions, including both soft and hard acid species. In single-component experiments, the adsorption capacity of CdK-m-COTTTB for Pb2+, Tb3+, and Zr4+ ions reached levels of 636.94, 432.90, and 357.14 mg·g-1, respectively, which is comparable to specific MOF absorbents. The rapid adsorption process was found to be chemisorption. Furthermore, CdK-m-COTTTB exhibited the capability to remove at least 12 different metal ions in both separate and multicomponent solutions. The material demonstrated excellent acid-base stability and renewability, which are advantageous for practical applications. CdK-m-COTTTB represents the first reported pristine MOF material for the removal of both hard and soft acid metal ions. This work serves as inspiration for the design and synthesis of porous crystalline materials that can efficiently remove diverse heavy metal pollutants.

Metal-Solvent Complex Formation at the Surface of InP Colloidal Quantum Dots.

The surface chemistry of colloidal semiconductor nanocrystals (QDs) profoundly influences their physical and chemical attributes. The insulating organic shell ensuring colloidal stability impedes charge transfer, thus limiting optoelectronic applications. Exchanging these ligands with shorter inorganic ones enhances charge mobility and stability, which is pivotal for using these materials as active layers for LEDs, photodetectors, and transistors. Among those, InP QDs also serve as a model for surface chemistry investigations. This study focuses on group III metal salts as inorganic ligands for InP QDs. We explored the ligand exchange mechanism when metal halide, nitrate, and perchlorate salts of group III (Al, In Ga), common Lewis acids, are used as ligands for the conductive inks. Moreover, we compared the exchange mechanism for two starting model systems: InP QDs capped with myristate and oleylamine as X- and L-type native organic ligands, respectively. We found that all metal halide, nitrate, and perchlorate salts dissolved in polar solvents (such as n-methylformamide, dimethylformamide, dimethyl sulfoxide, H2O) with various polarity formed metal-solvent complex cations [M(Solvent)6]3+ (e.g., [Al(MFA)6]3+, [Ga(MFA)6]3+, [In(MFA)6]3+), which passivated the surface of InP QDs after the removal of the initial organic ligand. All metal halide capped InP/[M(Solvent)6]3+ QDs show excellent colloidal stability in polar solvents with high dielectric constant even after 6 months in concentrations up to 74 mg/mL. Our findings demonstrate the dominance of dissociation-complexation mechanisms in polar solvents, ensuring colloidal stability. This comprehensive understanding of InP QD surface chemistry paves the way for exploring more complex QD systems such as InAs and InSb QDs.

Synthesis and toxicity assessment of Coffea arabica extract-derived gold nanoparticles loaded with doxorubicin in lung cancer cell cultures

Cancer is the second leading cause of death worldwide, despite the many treatments available, cancer patients face side effects that reduce their quality of life. Therefore, there is a need to develop novel strategies to increase the efficacy of treatments. In this study, gold nanoparticles obtained by green synthesis with Coffea arabica green bean extract were loaded with Doxorubicin, (a highly effective but non-specific drug) by direct interaction and using commercial organic ligands that allow colloidal dispersion at physiological and tumor pH. Conjugation of these components resulted in stable nanohybrids at physiological pH and a tumor pH release dependent, with a particle size less than 40 nm despite having the ligands and Doxorubicin loaded on their surface, which gave them greater specificity and cytotoxicity in H69 tumor cells.

Metal-organic framework as nanocarriers for agricultural applications: a review

Agrochemicals are substances used to promote plant growth and eradicate pests; and are essential to meeting the world food demand both qualitatively and quantitatively. Unfortunately, their extensive usage has resulted in certain significant problems, i.e., soil contamination, bioaccumulation, and the development of pest resistance. Consequently, there is a need for a reduced and more regulated usage of agrochemicals. The development of sustainable nanomaterials is encouraged in agricultural nanotechnology to minimize the usage of conventional fertilizers, herbicides, and pesticides. Metal-organic Framework (MOF)s are porous materials made of functional organic ligands and metal nodes or clusters connected by covalent bonds. Researchers are becoming increasingly interested in using MOF in a variety of sectors. The features of engineered MOFs have the potential to be an optimal strategy for producing impressively unique results in agricultural research. They also have advantages in terms of biocompatibility and biodegradability, which can be leveraged to boost the efficiency of traditional agrochemicals administration. Controlled release of agrochemicals offers an innovative solution to decrease the nutrient uptake rates and contamination of the environment. The application of MOF nanoparticles as nanocarriers to modify the loading and release properties of agrochemicals is particularly highlighted in this review.

Imaging 3D chemistry at 1 nm resolution with fused multi-modal electron tomography

Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment is completed. Even larger doses are required to achieve high resolution. Thus, chemical mapping in 3D has been unachievable except at lower resolution with the most radiation-hard materials. Here, high-resolution 3D chemical imaging is achieved near or below one-nanometer resolution in an Au-Fe3O4 metamaterial within an organic ligand matrix, Co3O4-Mn3O4 core-shell nanocrystals, and ZnS-Cu0.64S0.36 nanomaterial using fused multi-modal electron tomography. Multi-modal data fusion enables high-resolution chemical tomography often with 99% less dose by linking information encoded within both elastic (HAADF) and inelastic (EDX/EELS) signals. We thus demonstrate that sub-nanometer 3D resolution of chemistry is measurable for a broad class of geometrically and compositionally complex materials.